POWERED AIR PURIFYING RESPIRATOR HELMET

POWERED AIR PURIFYING RESPIRATOR HELMET P1004
 
 
The UNIMIG PAPR system provides industrial level protection for the most extreme welding applications and environments where effective and reliable eye and respiratory protection is an absolute must. This is a Powered Air Purifying Respirator system built with a tough robust exterior yet is comfortable and lightweight. The ergonomic design, lightweight shell, fully adjustable head gear & back harness delivers maximum comfort during long welding periods.
 
The quick-disconnect and swivel breathing tube provides easy adjustability to accommodate space restraints. The automatic detecting control system provides constantly stable clean air. The LCD display clearly shows airflow level, battery charge level and filter status.
 
3 levels of airflow provide increased comfort for varied working conditions and a flashing and audible alarm indicates low battery, low airflow, filter blockage and high battery temperature. The respirator unit is fitted with a spark filter and replaceable pre-filter to protect and extend the life of the main filter. The 12-volt, 4400MAh lithium-ion battery provides for up to 8 hours use on level 1, 6 hours on level 2 and 4 hours on level 3 airflow setting.
 
The battery requires a 3 hour charge at a maximum of 500 charge cycles. A handy, easy to use flow-check meter is provided to ensure the correct airflow is present for maximum protection. Fitted with the advanced UNIMIG XA-5022(D) series helmet featuring the latest digitally-controlled auto darkening filter, adjustable from shade 5-9 and shade 9-13 makes it ideal for MMA, TIG and MIG welding, as well as Plasma Cutting and even grinding applications.
 
The switching time from light to dark is approximately 0.0001 second. The delay time from dark to light may be adjusted between 0.1 and 0.9 seconds. The UNIMIG XA-5022(D) is a lightweight and comfortable design offering excellent neck coverage and protection.
 
The combination of the UNIMIG PAPR unit and the UNIMIG XA-5022(D) helmet provides you with standards-approved and certified welding protection ensuring the highest levels of welding safety whilst at a highly competitive price.
 
 
 
STANDARDS
UNIMIG PAPR SYSTEM: complies with AS/NZS 1716:2012. UNIMIG FACE SHIELD: complies with AS/NZS 1337.1:2010 [High Impact]. UNIMIG WELDING FILTER: cpmlies with AS/NZS 1338.1:21012 Welding Guns of Australia will not take responsibility for respiratory protective equipment that is chosen incorrectly. Some welding environments may contain dangerous levels of poisonous gases that are not suitably filtered by a particle fillter. UNIMIG PAPR is not suitable for environments that contain poisonous gases or have an oxygen deficiency. It is the purchasers' responsibility to ensure their workplace is tested adequately for fume hazards and adequate extraction and ventilation is used in confined space applications. 
 
 
 Clean Air Welding
 Ultimate Protection from Harmful Welding Fumes
 Auto-Darkening Helmet
 Positive pressure system
 Designed to work an 8 hour shift
 Long lasting reliable P2 filter
 Auto shutdown mode
 3 airflow levels for varied working conditions
 Blocked filter, low airflow, low battery alarms
 Lightweight, ergonomic design
 Shoulder harness for extended wear
 Side or rear mounting of respirator pack
 Standards Compliant AS/NZS 1716:2012 
 
 
UNIMIG Powered Air Purifying Respirator System includes:
PAPR System, UNIMIG XA-5022(D) Series Helmet
Battery Charger
Flow Check
Carry Bag 
Shoulder Harness
 
 
IF OUR ASKING PRICE IS TOO HIGH, TRY US! MAKE US AN OFFER!